Using WebGIS to Develop a Spatial Bibliography for Organizing, Mapping, and Disseminating Research Information: A Case Study of Quaking Aspen

On the Ground • Spatial data is valuable to researchers for locating studies that occur in a particular area of interest, or one with similar attributes. • Without a standard in publishing protocol, spatial data largely goes unreported, or is difficult to find without searching the publication. • Assigning location data and displaying points on a public web map makes locating publications based on spatial location possible

Decay resistance variability of European wood species thermally modified by industrial process

Thermal modification is now considered as a new ecofriendly industrial wood modification process improving mainly the material decay resistance and its dimensional stability. Most industrial thermal treatment processes use convection heat transfer which induces sometimes heterogeneous treatment temperature propagation within the oven and lead to the heterogeneity in treatment efficiency. Thus, it is common that treatment is not completely effective on several stack boards, in a same batch. The aim of this paper was to study the decay resistance variability of various European wood species thermally modified. Thermal modifications were performed around 240°C during 4h, on about 10 m3 of 27 x 152 x 2000 mm3 wood planks placed in an industrial oven having a volume of 20 m3, on the following wood species: spruce, ash, beech and poplar. All of the tests concerning the decay resistance were carried out in the laboratory using untreated beech and pine woods as reference materials. An agar block test was used to determine the resistance of thermally modified woods, leached beforehand according to EN 84 standard or not, to brown-rot and white-rot fungi, according to XP CEN/TS 15083-1. A large selection of treated wood samples was tested in order to estimate the variability of treatment efficiency. Thermal treatment increased the biological durability of all leached and un-leached modified wood samples, compared with native wood species. The treatment temperature of 240°C used in this study is sufficient to reach durability classes ''durable'' or ''very durable'' for the four wood species. However, the dispersion of weight loss values, due to the fungal attacks was very important and showed a large variability of the durability of wood which has been treated in a single batch. These results showed that there is a substantial need to develop process control and² indicator in order to insure that the quality of treated timber is properly evaluated with a view to putting this modified timber on the market under a chain of custody. (Résumé d'auteur

Services just for men? Insights from a national study of the well men services pilots.

Men continue to have a lower life expectancy in most countries compared to women. Explanations of this gendered health inequality tend to focus on male risk taking, unhealthy lifestyle choices and resistance to seeking help from health services. In the period 2005-2008 the Scottish Government funded a nationwide community health promotion programme aimed at improving men's health, called Well Men Service Pilots (henceforth WMS)

Is paternal age associated with transfer day, developmental stage, morphology, and initial hCG-rise of the competent blastocyst leading to live birth?:A multicenter cohort study

In this study we investigated whether age of men undergoing assisted reproductive technology (ART) treatment was associated with day of transfer, stage, morphology, and initial hCG-rise of the competent blastocyst leading to a live birth? The design was a multicenter historical cohort study based on exposure (age) and outcome data (blastocyst stage and morphology and initial hCG-rise) from men whose partner underwent single blastocyst transfer resulting in singleton pregnancy/birth. The ART treatments were carried out at sixteen private and university-based public fertility clinics. We included 7246 men and women, who between 2014 and 2018 underwent controlled ovarian stimulation (COS) or Frozen-thawed Embryo Transfer (FET) with a single blastocyst transfer resulting in singleton pregnancy were identified. 4842 men with a partner giving birth were included, by linking data to the Danish Medical Birth Registry. We showed that the adjusted association between paternal age and transfer day in COS treatments was OR 1.06, 95% CI (1.00;1.13). Meaning that for every increase of one year, men had a 6% increased probability that the competent blastocyst was transferred on day 6 compared to day 5. Further we showed that the mean difference in hCG values when comparing paternal age group 30–34, 35–39 and 40–45 with the age group 25–29 in those receiving COS treatment, all showed significantly lower adjusted values for older men. In conclusion we hypothesize that the later transfer (day 6) in female partners of older men may be due to longer time spent by the oocyte to repair fragmented DNA of the sperm cells, which should be a focus of future research in men

Cytotoxicity and ion release of alloy nanoparticles

It is well-known that nanoparticles could cause toxic effects in cells. Alloy nanoparticles with yet unknown health risk may be released from cardiovascular implants made of Nickel–Titanium or Cobalt–Chromium due to abrasion or production failure. We show the bio-response of human primary endothelial and smooth muscle cells exposed to different concentrations of metal and alloy nanoparticles. Nanoparticles having primary particle sizes in the range of 5–250 nm were generated using laser ablation in three different solutions avoiding artificial chemical additives, and giving access to formulations containing nanoparticles only stabilized by biological ligands. Endothelial cells are found to be more sensitive to nanoparticle exposure than smooth muscle cells. Cobalt and Nickel nanoparticles caused the highest cytotoxicity. In contrast, Titanium, Nickel–Iron, and Nickel–Titanium nanoparticles had almost no influence on cells below a nanoparticle concentration of 10 μM. Nanoparticles in cysteine dissolved almost completely, whereas less ions are released when nanoparticles were stabilized in water or citrate solution. Nanoparticles stabilized by cysteine caused less inhibitory effects on cells suggesting cysteine to form metal complexes with bioactive ions in media

The Splicing Efficiency of Activating HRAS Mutations Can Determine Costello Syndrome Phenotype and Frequency in Cancer

Costello syndrome (CS) may be caused by activating mutations in codon 12/13 of the HRAS proto-oncogene. HRAS p.Gly12Val mutations have the highest transforming activity, are very frequent in cancers, but very rare in CS, where they are reported to cause a severe, early lethal, phenotype. We identified an unusual, new germline p.Gly12Val mutation, c.35_36GC>TG, in a 12-year-old boy with attenuated CS. Analysis of his HRAS cDNA showed high levels of exon 2 skipping. Using wild type and mutant HRAS minigenes, we confirmed that c.35_36GC>TG results in exon 2 skipping by simultaneously disrupting the function of a critical Exonic Splicing Enhancer (ESE) and creation of an Exonic Splicing Silencer (ESS). We show that this vulnerability of HRAS exon 2 is caused by a weak 3' splice site, which makes exon 2 inclusion dependent on binding of splicing stimulatory proteins, like SRSF2, to the critical ESE. Because the majority of cancer- and CS- causing mutations are located here, they affect splicing differently. Therefore, our results also demonstrate that the phenotype in CS and somatic cancers is not only determined by the different transforming potentials of mutant HRAS proteins, but also by the efficiency of exon 2 inclusion resulting from the different HRAS mutations. Finally, we show that a splice switching oligonucleotide (SSO) that blocks access to the critical ESE causes exon 2 skipping and halts proliferation of cancer cells. This unravels a potential for development of new anti-cancer therapies based on SSO-mediated HRAS exon 2 skipping

Cross-cultural development of an item list for computer-adaptive testing of fatigue in oncological patients

<p>Abstract</p> <p>Introduction</p> <p>Within an ongoing project of the EORTC Quality of Life Group, we are developing computerized adaptive test (CAT) measures for the QLQ-C30 scales. These new CAT measures are conceptualised to reflect the same constructs as the QLQ-C30 scales. Accordingly, the Fatigue-CAT is intended to capture physical and general fatigue.</p> <p>Methods</p> <p>The EORTC approach to CAT development comprises four phases (literature search, operationalisation, pre-testing, and field testing). Phases I-III are described in detail in this paper. A literature search for fatigue items was performed in major medical databases. After refinement through several expert panels, the remaining items were used as the basis for adapting items and/or formulating new items fitting the EORTC item style. To obtain feedback from patients with cancer, these English items were translated into Danish, French, German, and Spanish and tested in the respective countries.</p> <p>Results</p> <p>Based on the literature search a list containing 588 items was generated. After a comprehensive item selection procedure focusing on content, redundancy, item clarity and item difficulty a list of 44 fatigue items was generated. Patient interviews (n = 52) resulted in 12 revisions of wording and translations.</p> <p>Discussion</p> <p>The item list developed in phases I-III will be further investigated within a field-testing phase (IV) to examine psychometric characteristics and to fit an item response theory model. The Fatigue CAT based on this item bank will provide scores that are backward-compatible to the original QLQ-C30 fatigue scale.</p

Disk-Jet Connection in the Radio Galaxy 3C 120

We present the results of extensive multi-frequency monitoring of the radio galaxy 3C 120 between 2002 and 2007 at X-ray, optical, and radio wave bands, as well as imaging with the Very Long Baseline Array (VLBA). Over the 5 yr of observation, significant dips in the X-ray light curve are followed by ejections of bright superluminal knots in the VLBA images. Consistent with this, the X-ray flux and 37 GHz flux are anti-correlated with X-ray leading the radio variations. This implies that, in this radio galaxy, the radiative state of accretion disk plus corona system, where the X-rays are produced, has a direct effect on the events in the jet, where the radio emission originates. The X-ray power spectral density of 3C 120 shows a break, with steeper slope at shorter timescale and the break timescale is commensurate with the mass of the central black hole based on observations of Seyfert galaxies and black hole X-ray binaries. These findings provide support for the paradigm that black hole X-ray binaries and active galactic nuclei are fundamentally similar systems, with characteristic time and size scales linearly proportional to the mass of the central black hole. The X-ray and optical variations are strongly correlated in 3C 120, which implies that the optical emission in this object arises from the same general region as the X-rays, i.e., in the accretion disk-corona system. We numerically model multi-wavelength light curves of 3C 120 from such a system with the optical-UV emission produced in the disk and the X-rays generated by scattering of thermal photons by hot electrons in the corona. From the comparison of the temporal properties of the model light curves to that of the observed variability, we constrain the physical size of the corona and the distances of the emitting regions from the central BH.Comment: Accepted for publication in the Astrophysical Journal. 28 pages, 21 figures, 2 table